TIL-A12 Model hot air PVC welding machine for inflatable boats and tents
|
Model |
TIL-A12 |
|
Voltage |
AC220V/50Hz |
|
Output power |
3500W |
|
Heat control |
Up to 750ºC |
|
Working speed |
1-24m/min |
|
Pressure |
0.35-0.6Mpa |
|
Roller rel |
20mm,30mm,40mm,50mm |
|
Machine dimension |
1600 x 650 x 1500mm |
|
Net weight |
245 kg |
Introduction of Hot Air Welding Machine
Hot air welding machines offer unique advantages in the production of inflatable products made from membrane structures. Unlike high-frequency welding and hot-melt welding technologies, hot air is blown between the sealing surfaces under suitable pressure to achieve a perfect welding effect. PVC and TPU materials are widely used for manufacturing water polo balls, water tanks, inflatable swimming pools, large inflatable tents, inflatable boats, rubber boats, fishing boats, and many other inflatable products.
Purpose
Hot air welding machines are suitable for producing a wide range of waterproof products made from coated PU, PVC, TPU, PE, and PVA materials, including large tents, inflatable boats, children's inflatable toys, car covers, and more.
Welding Materials
-
Vinyl (PVC) laminated fabric
-
Vinyl-coated fabrics
-
Vinyl films
-
Polyurethane film
-
Polypropylene-coated fabric
-
Polyethylene (PE)
-
Thermoplastic Rubber (TPR) film
-
Thermoplastic rubber fabrics
-
Nonwoven polyester
-
Various fusing tapes
-
Weldable webbings
-
Rigid extruded products
Features of Hot Air Welding Machine
-
Original imported computer chip design, programmable according to user requirements, with microcomputer automatic control of the entire machine. Simple operation, stable performance, and low failure rate.
-
Equipped with a 3-inch Panasonic touch screen, displaying all operating data directly and clearly.
-
Temperature is automatically tracked and controlled by the computer, with a precision of up to ±1°C.
-
Temperature is controlled by a computer chip. Two separate motors drive the upper and lower rollers, allowing independent speed adjustment.
-
Automatic cooling function: after heating is turned off, the machine continues cooling before automatic shutdown to protect components and extend service life.
-
No worktable design, ideal for processing large products such as tents, rubber boats, air balloons, and seamless inflatable products.
-
Especially suitable for processing rubber boat heads, round corners, circular cones, and other curved welding applications.
