W5 Series
P1
◎ 4~20mA、0~20mA、MANUAL Selection S1 (Input impedance : 249Ω) ◎ 1~5VDC、0~5VDC Selection S2 (Input impedance : 200KΩ) ◎ 2~10VDC、0~10VDC Selection S3 (Input impedance : 18KΩ) Functional adjustment
VR1 BIAS : Adjustment of standard output voltage.
(Counter-clockwise adjust the control signal, lower the input will produce the output.) VR2 SFS : Adjustment of buffer rising time.
(Adjusting range 1~22 seconds, clockwise adjustment will increase the time. No applicable for zero crossing type product.)
Constant current type : Adjusting range 2~16 seconds VR3 Max : Adjustment of maximum output voltage.
(Adjusting range 0~100%, counter-clockwise adjustment will decrease the output. Set to zero will have no output.)
Constant current type :Current adjustment.(Adjusting range 50~100%, counter-clockwise adjustment will decrease the output.) VR4 OLSET : Adjustment of Over current.(Adjusting range 60~120%,counter-clockwise adjustment will decrease the output.) PB1 RESET : Over current RESET
Descriptions for LED lights and trouble shooting
NEXT ถัดไป >>>
|